A ring that doesn't fit tends to stay in the drawer. If you've been meaning to get yours sized, you've probably wondered what it will cost. The plain answer is that it depends on the ring. Resizing isn't one fixed job, because no two rings ask for the same work at the bench.
Here are the things that matter most, so you know what to expect when you bring yours in.
The metal
We resize rings in silver, 10k and 14k gold, 18k gold and platinum. The metal shapes the job in two ways: what the material costs, and how it behaves when we work it.
When a ring goes up in size, we add metal to match, so the cost of that metal is part of the job. Higher-karat gold has more gold in it, and platinum takes more heat and more time to work than gold or silver.
Not sure what your ring is made of? Look inside the band for a stamp. If it's worn away or you can't read it, bring the ring in and we'll check.
Band width and thickness
A slim band and a wide, heavy one are very different jobs. The more metal there is, the more there is to cut, join and finish so the seam disappears. When a wide band is going up in size, it also needs more added metal to keep its shape.
A wide or heavy band doesn't rule a ring out. We resize wide bands (6mm and up) and thick bands (1.5mm and up) in silver, gold and platinum. They take more work than a slim band, but we're set up to do them.
How many sizes
Going up or down one size is a smaller job than moving several. The further a ring has to travel, the more metal gets added or taken out, and the more care it takes to keep the band round and even.
It helps to know your size before you come in, but you don't need to. We can check the fit on your finger, which is worth doing if your ring has been a little loose in winter and snug in summer.
Sizing down?
If your ring needs to be sized down, we usually measure and cut out a chunk of it, reshape it, and solder it back together. We usually give you credit for the amount of material we cut out, and just subtract this from the ring resize fee. If you’d like to keep the scrap metal just let us know when you drop it off!
When a reshank is needed
The shank is the part of the ring that wraps around your finger. After years of daily wear, it can get thin, especially along the bottom of the band. A thin band doesn't always make a good candidate for a simple resize, since the new join is only as strong as the metal around it.
In that case, a reshank can be the better repair. We replace the worn section of the band with new metal, which gives the ring a sturdier base. It's more involved than a standard resize, so we'll tell you if we think your ring needs one and why.
What to expect
We'd rather see your ring than guess at it, so bring it in and we'll look at all four of these things with you. Repairs typically take 7-10 days and come with a 30-day repair warranty from final payment.
Hey there, I’m Nina!
I’m a Seattle-based jeweler specializing in custom designs, heirloom restorations, and thoughtful repairs, all done by hand, start to finish, right here in my studio. Every piece I work on carries a story, and I take pride in preserving that story through craftsmanship, care, and attention to detail.
Whether you’re dreaming up a one-of-a-kind creation, bringing new life to a family treasure, or simply fixing a favorite everyday piece, my goal is to make the experience personal, collaborative, and meaningful.
If you have an idea, or even just a feeling, about what you want, let’s bring it to life together.